Salt Water Spary Chamber For Plating

Salt spray corrosion test machine is widely used in metal springs, sanitary ware, screws, fasteners, metal products, metal plating, metal products, electrical and electronic, magnetic materials, sports equipment, lock industry, optical industry, metal jewelry, leather hardware, watchmaking industry, auto parts, bicycles, electric cars, motorcycle parts, chemical coatings, gas equipment, lighting, connectors, metal furniture, powder metallurgy, mobile phones, computer chassis, and household appliances.

Salt Water Spraying Test/Use of materials
1.Cabinet Material: corrosion resistance, aging resistance, high strength PVC board.
2.Inner box Material: imported corrosion-resistant, high strength PVC / imported corrosion-resistant, high strength, anti-aging, high temperature PP board.   [sales(at)aslitesting.com]
3.Cover material: imported corrosion-resistant, high strength transparent PVC / imported corrosion-resistant, high strength, high temperature transparent PC board.
4.Other accessories: all stainless steel, copper or corrosion, high temperature materials.
5.Standard configuration: rod, V-type sample holder pay the 1, 2 nozzles, funnels, measuring cylinder 2 sets.
6.Safety protection: leakage, short circuit, over-temperature, water shortages, end of the trial, over current protection.

Spray Chamber/Technical parameters:
1.Resolution: 0.01 degree, 0.1% R.H
2.Temperature range: -100 degree ~ 200 degree.
3.Humidity range: 10% ~ 99.9% R.H
7.has a fixed value at the end timing shutdown and program functions
8.with reservations starting and stopping and failure prompts
9.thermometer: PT-1002 piece
10.The main components of each system is equipped with a safety detector interface device, when a fault is detected, the screen displays the fault status immediately and disconnect the power.

Salt Fog Corrosion Test/Spray:
(A).using Bo Nute principle draw brine and then atomized, uniform atomization, no blocking phenomenon of crystallization, to ensure the continuous testing standards.
(B).Nozzle: The nozzle is made of special glass, the use of time of up to 4200H, adjust the size of the spray volume and spray angle.
(C).spray volume: spray tower located in the middle of the laboratory system, so that the fog off the uniform, adjustable 1 ~ 2ML, 80CM2/HR (16-hour average volume)

Certificate of these machines:

China official 3rd party calibration report

CE certiification

For the package:

1. PP film first

2. Vacuum package

3. PP film again

4. 10mm thickness PU foam to avoid collision

5. stronged plywood case

6. Standard ASLI CASE MARK

Our Main Products:

1) temperature humidity chamber

2) temperature fast change chamber (ESS chamber)

3) thermal shock chamber

4) temperture humidity combined salt spray chamber

5) temperture humidity combined vibration chamber

6) pressure accelerated aging chamber (PCT&HAST chamber)

7) high temperature aging chamber

8) sand and dust tester

9) rain/water spray chamber

10) salt spray chamber

11) UV climate resistant chamber

12) high temperature chamber/muffle furnace

13) vacuum oven

14) high frequency vibration tester

15) mechanical shock and impact tester

16) acceleration mechanical shock tester